This 351W Ford pro louvered windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 351W Ford pro louvered windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

BBC Mounting Kit for Pro Plus Windage Tray #20-909, Kit Includes 4 studs, nuts and washers.

Pickup for 11-910 Circle Track Left Turn Oil Pan with a M-86C or M-86CHV Oil Pump with 3/4" Inlet

301-455 Pontiac Race High Volume Oil Pump with 3/4" Inlet.

Pickup for 11-920 Circle Track Left Turn Oil Pan with a M-86C or M-86CHV Oil Pump with 3/4" Inlet

429 FE Ford Screen Windage trays for stock or aftermarket front sump oil pans. Mounts between the oil pan and block and includes oil pan studs and nuts.

429 FE Ford Screen Windage trays for stock or aftermarket front sump oil pans. Mounts between the oil pan and block and includes oil pan studs and nuts.

4.6 Ford Screen Windage tray for stock or aftermarket oil pans. Mounts between the oil pan and block, includes oil pan studs and nuts.

4.6 Ford Screen Windage tray for stock or aftermarket oil pans. Mounts between the oil pan and block, includes oil pan studs and nuts.

This SBC high volume pressure balanced oil pump has been modified to provide a smooth continuous flow of oil through the full RPM range. By reworking the pump housing and providing feeder grooves, we bleed some of the high pressure back into the gears providing smoother operation and more constant pressure. This allows for the high RPM operation on a race engine and limits oil pump cavitation. Since it is designed for smooth operation at high RPM’s, the idling oil pressure can be up to 10 lbs lower than that of a standard oil pump.

*Standard volume Hi Pressure performance upgrade for M-55 & M-55A *Standard Volume *Uses 5/8” Press in Pickup Screen *Housing and cover are CNC machined and phosphate coated *Includes lower pressure spring to be used if lower pressure is desired, and intermediate shaft

*Standard volume Hi Pressure performance upgrade for M-155 *Standard Volume *Uses 3/4” Press in Pickup Screen *Housing and cover are CNC machined and phosphate coated *Includes lower pressure spring to be used if lower pressure is desired, and intermediate shaft

*High volume performance upgrade *10% increase in volume over standard *Uses ¾” Press in Pickup Screen or bolt on style *Housing and cover are CNC machined and phosphate coated *Includes lower pressure spring to be used if lower pressure is desired, and intermediate shaft *Drive and idler shafts extended into cover to allow for additional support *Screw in plug retains relief valve spring instead of pin *All bolts are self locking socket heads and cover is doweled to pump for proper alignment

LS1 PICKUP FOR 11-281 OPEN CHASSIS CT PAN

LSI PICKUP FOR 13-274A PAN

SBC High Performance (+25% vol.) 3/4" Inlet.

Honda D16A Pickup for Road Race 15-960 Oil Pan

*Anti-Cavitation version of the M10552 *Same as the 10552 with the addition of grooves machined in the body and cover. The grooves reduce cavitation effects in high RPM applications *Using this oil pump will reduce pressure at idle

*Anti-Cavitation version of the M10555 *Same as the 10555 with the addition of grooves machined in the body and cover. The grooves reduce cavitation effects in high RPM applications. *Using this oil pump will reduce pressure at idle

This 351W / 351C Windage tray mounting kit includes four accessory mounting main cap studs, nuts, washers and tray mounting nuts.