#24-260 Manual Accusump Ball Valve with female 1/2" N.P.T. ends. Comes with 1/2" N.P.T pipe nipple for installation to the Accusump.

Steel band mounting brackets for our 4-1/4" Dia. Accusumps. Mounting clamps are required for all Accusumps. When used on each end of an Accusump they provide the proper support at the end caps to ensure the tube does not become distorted. These are sold as a set of two stainless steel T-clamps.

Steel band mounting brackets for our 1-QT 3-1/4" Dia. Accusumps. Mounting clamps are required for all Accusumps. When used on each end of an Accusump they provide the proper support at the end caps to ensure the tube does not become distorted. These are sold as a set of two stainless steel T-clamps.

Check Valve ensures all the oil being discharged out of an Accusump goes to lubricate the engine bearings and is not fed back toward the pump. For use in systems where a remote oil filter or a cooler is used. Uses 1/2" N.P.T. female threads.

This liquid filled Accusump gauge is an upgrade to the standard gauge. This gauge features a larger dia. stainless steel case and is less effected by vibration. Recommended for severe duty and marine use.

This Electric Pressure Control Valve kit is to convert a standard #24-270 to #24-271 specifications.

This Accusump Electric Pressure Control Valve kit is to convert a standard #24-270 to #24-273 specifications.

This Accusump Electric Control Valve kit is to convert a standard #24-270 to #24-275 spec

6 foot Accusump Manual Valve Cable kit makes it easier for a belted in driver to open and close the Accusump. Ideal for applications where the Accusump can not be mounted near the driver, or in a hard to access location. Kit comes with heavy duty cable, mounting bracket, pipe fitting, and specially designed valve.

Electric Accusump Valve kit provides a convenient way of operating the Accusump. They are useful when the accumulator is mounted in a hard to access location. When wired directly into the ignition switch the Accusump can be operated automatically to provide pre-oiling. The kit comes with the electric valve which has 1/2" N.P.T. female threads, a 1/2" N.P.T. pipe nipple, a toggle switch, a length of wire, terminals and installation instructions. Recommended for use in street and pre-oiling applications only. For the convenience of an electric valve in racing applications see our EPC electric valve listed below.

Billet aluminum mounting brackets for 4-1/4" Dia. Accusumps. Mounting brackets are required for all Accusumps to provide the proper support at the end caps to ensure the tube does not become distorted. These billet aluminum mounting clamps not only provide that support but also offer an attractive presentation. Sold in sets of two.

This Electric Pressure Control Valve Kit is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level. Comes with the regulator, electric valve, a pipe nipple, a toggle switch, wire, terminals and instructions.

The 1 Quart Accusump is ideal for surge control on motorcycle engines and pre-oiling for all engines. It’s small size requires minimal space for mounting. Has a 12" long and 3-1/4" dia. body.

The 2 Quart Accusump is ideal for surge control on small block V-8, V-6, and 4 cylinder engines as well as pre-oiling for all engines. Has a 12" long and 4-1/4" dia. body.

This Electric Pressure Control Valve Kit is for a discharge/refill of 20-25 PSI. These valves have the convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level. Comes with the regulator, electric valve, a pipe nipple, a toggle switch, wire, terminals and instructions.

This Electric Pressure Control Valve Kit is for a discharge/refill of 55-60 PSI. These valves have the convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level. Comes with the regulator, electric valve, a pipe nipple, a toggle switch, wire, terminals and instructions.

The 3 Quart Accusump is ideal for V-8 and high horsepower V-6 and 4 cylinders engines. It is the original and has been providing pre-oiling and surge protection in all types of racing and recreational vehicles for over 30 years. Has a 16" long and 4-1/4" dia. body.

The Accusump Turbo After-Oiler solves the main cause of Turbo wear and failure by supplying a pressurized discharge of oil to the hot turbo bearings during turbo spool down. This oil will lubricate and cool the bearings and prevent coke build up (which limits oil flow). Manufactured with the same design features and to the same high standards as all Accusumps. A piston separates the oil side from the air pressure side which allows the the unit to be mounted in any position and permits an air precharge. With a precharge all the oil is discharged under pressure for positive oiling and no oil is diverted from the engine until pressure is established on restart. The Turbo After-Oiler is easy to install and is virtually maintenance free.

The 3 Quart High Pressure Accusump is ideal for big cubic inch engines, those that operate with high oil pressures, and for severe racing conditions. If there is room for a unit of this size, the longer length allows it to hold more air and oil. This offers more pre-oiling and surge protection in a narrower oil pressure range. Has a 22" long and 4-1/4" dia. body.

This 1 quart Marine Accusump kit is for pre-oiling and surge control on small engine applications. Tube is 12" long with 3-1/4" Dia. All components are anodized aluminum, stainless, or brass. The kit comes with a liquid filled stainless steel pressure gauge, stainless steel mounting clamps, brass safety valve, E. P. C. valve system, on / off switch, wire and terminals and installation instructions.

See Details for more information.