This one-way screen windage kit can be used in almost any application. Includes a 22" x 12" sheet of one-way screen, two 1" x 1/8" x 24" mounting rails and all necessary clips, washers and locking screws needed. Welding is required.

Replacement windage tray for small block stock stud mounted trays, which come on many crate engines. Designed to improve oil control over the stock tray. Built out of .100 aluminum for strength, and hardcoated to improve oil flow, these trays are a direct replacement for the stock tray and fit stock pans along with most aftermarket pans.

SBC Mounting kit for Screen Windage Trays (3 studs, nuts and washers).

This 429-460 OEM style windage tray mounting kit. (bolts)

The SBC Pro-Plus windage tray is mounted off of the main caps and is designed as an integral part of the Pro-Plus oil recovery system. Mounting the tray off of the main caps seals the pickup area off from the crank windage and keeps oil from splashing out of that area under race conditions. SEE DETAILS.

This S.B Chevy Pro Plus windage tray - short mounts off of the main caps and is designed as an integral part of the Pro Plus oil recovery system. Mounting the tray off of the main caps enables the tray to more tightly seal off the pickup area from the crank windage and keeps oil from splashing out of that area under race conditions.

B.B. Chevy Pro Plus windage tray mounts off of the main caps and is designed as an integral part of the Pro Plus oil recovery system. Mounting the tray off of the main caps enables the tray to more tightly seal off the pickup area from the crank windage and keeps oil from splashing out of that area under race conditions.

Canton's Chevy Main Cap Mounted Screen Windage Trays come in short and full length versions. The short style tray fit into stock or aftermarket oil pans with stock front sections and the full length trays only fit into aftermarket oil pans that are deeper in the front. SEE DETAILS.

This SBC full length Screen Windage tray is for left side dipsticks. The full length trays only fit into aftermarket oil pans that are deeper in the front.

This SBC pro louvered windage tray is a direct replacement for our screen trays in our small block Chevy power series circle track pans. Black anodized .100" aluminum. NOTE: When used with pans with notch in power pouch for starter clearance, tray will require trimming for proper fit.

This BBC short style Screen Windage trays tray fits into stock or aftermarket oil pans with stock front sections.

This BBC long style Screen Windage trays only fits into aftermarket oil pans that are deeper in the front.

This 351C Ford Screen Windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation

This 429-460 Ford Screen Windage tray for front and rear sump. This tray is designed to fit into stock and aftermarket oil pans.

SBC Mounting Kit for Pro Power Plus Windage Tray #20-908 & 20-908S Kit Includes 4 studs, nuts & washers.

289,302,351C/M,351W AND 429/460 These trays are designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation. Note: 94-95 stock Mustang style oil pan is a tight fit.

This 289-302 Ford screen windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary

This 351W Ford screen windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 351W Ford screen windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

289,302,351C/M,351W AND 429/460 Mounting Kits include four main cap studs, nuts, washers and tray mounting hardware. Full main cap mounting kits include ten main cap studs, nuts, washers and accessory mounting hardware. *PLEASE NOTE: (1) For R302 Engine Blocks use #20-942 or #20-943 & (2) The 429-460 mounting kit includes bolts, not studs.

BBC Mounting kit for Screen Windage Trays (4 studs, nuts and washers).

The Pontiac Screen Windage Tray sandwiches between block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OE.

The Pontiac Pro style Windage Tray sandwiches between block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OEM.

This 289-302 Ford pro louvered windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation. NOTE: ’94-’95 STOCK MUSTANG STYLE OIL PAN IS A TIGHT FIT.

This 289-302 Ford pro louvered windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.