These Chrome plated valve cover breathers are made to work with 1-3/8" breather tubes. The filter element uses a woven cotton fabric enclosed in a wire mesh. The cotton fiber holds oil which traps dirt particles without restricting the air flow. Washable for long life. One to a package.

These outlets replace the standard water necks on Chevy intakes so that a -16 AN fitting and a steel braided hose can be used instead of the normal radiator hoses.

This water outlet restrictor kit fits all GM V-8’s, V-6’s and SB Fords. The kit includes three restrictor plates with different sized holes; a 5/8", 3/4" and 1". This allows you to fine tune your cooling system for optimum performance by restricting the outlet flow of water from the engine thus increasing the pressure within the block. This limiting the possibility of steam pockets forming and allows the coolant to absorb more heat.

This is a vented replacement cap for our overflow catch tanks, recovery tanks, and power steering tanks that come with this style cap. If you are not sure if the cap you are replacing is non-vented, check underneath the cap. A non-vented cap will have no vent hole underneath where a vented cap will have a small hole close to the center of the cap.

These Main Support Windage Trays bolt to the pre-drilled and tapped holes on our main cap stud supports. These trays keep the windage around the rotating assembly away from the oil in the sump and the oil in the sump away from the rotating assembly. Come with mounting bolts.