A higher pressure bypass spring in an oil pump forces more oil through the engine while a lower pressure spring allows for more oil to be recycled within the pump. This spring allows you to replace your stock standard pressure spring with one of a higher pressure. The spring rasies the oil pumps bypass pressure to 50-75 PSI.

A higher pressure bypass spring in an oil pump forces more oil through the engine while a lower pressure spring allows for more oil to be recycled within the pump. This spring allows you to replace your stock standard pressure spring with one of a higher pressure. The spring rasies the oil pumps bypass pressure to 60-85 PSI.

1/2" Copper Drain Plug Washers, Package of 10. Copper washers are far superior to the standard plastic washers.

This oil filter seal kit includes all the seals used in a CM remote oil filter.

Replacement O-Ring kit.

Ford 289-302 high pressure oil pump spring kit. A higher pressure bypass spring in a oil pump forces more oil through the engine while a lower pressure spring allows for more oil to be recycled within the pump. This Ford 289- 302 high pressure oil pump spring kit allows you to replace your stock standard pressure spring with one of a higher pressure. Kit includes the cup plug as used in the ’69-’70 302 Boss engines. This spring is designed as an upgrade for the M68 standard volume pump.

-10 AN Male Weld in Fitting, Steel.

-12 AN Male Weld in Fitting, Steel.

3/8" N.P.T. Aluminum Bung with Plug.

1/2" N.P.T. Steel Bung with Plug.

1" N.P.T. Steel Bung & Plug for Use As An Inspection Plug.

This 3/8" N.P.T. to -6 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering

3/8" N.P.T. to -8 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1/2" N.P.T. to -12 AN steel adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1/2" N.P.T. to -12 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1 foot -10 Blue C.P.E. Racing Hose has a rubber inner tube bonded to a reinforced textile braid and covered with blue synthetic rubber cover. Compatible with ols, fuels, and coolants. Designed to operate at 250 P.S.I. and 300F. Use with push in and lock ends.

This oil filter seal kit includes all the seals used in a Cast CM spin-on oil filter.

This oil filter seal kit includes all the seals used in the NEW Billet CM spin-on oil filters.

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.

Replacement O-Ring kit for 22-520 and 22-521 Oil Input Adapter.

Replacement O-Ring kit for 22-550 SBC Oil Input Sandwich Adapter, 22-580 BBC Oil Input Sandwich Adapter, 22-540 & 22-541 SBC Remote Oil Cooler Sandwich Adapter, 22-542 & 22-544 BBC Oil Cooler Sanwich Adapter, 22-580 & 22-581 & 22-584 Chevy Billet Remote Oil Filter Adapters.

Replacement O-Ring kit. Use With Universal Oil Input Adaptrs 22-565, 22-566, 22-567, 22-568, & 22-569 also use with Universal Oil Cooler Adapters 22-545, 22-546, 22-547, 22-548, & 22-549 also use with 90 Degree Rotating Billet Remote Oil Filter Adapters 22-592, 22-593, 22-595, 22-596, 22-597, & 22-598.

This oil filter seal kit includes all the seals used in a CM Super filter.

This 1 foot -6 Stainless Steel Braided hose is a C.P.E. synthetic rubber tube bonded with a woven nylon braid and covered and secured with a 308 stainless steel outer braid. Made to resist extreme heat, abrasion and corrosion. Operating temperature is from -40 to +350 deg.. F. and can withstand working pressures up to 1000 PSI. For use with hydrocarbon and alcohol based fuels, motor oils, and coolant.