5" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

5" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

5" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

This 6" Dia. 3 Rib Flat belt power steering pulley is designed to be easily installed on to our steel flange mount (part #73-273F) which is sized for .661" shafts. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

*High volume performance upgrade *10% increase in volume over standard *Uses ¾” Press in Pickup Screen or bolt on style *Housing and cover are CNC machined and phosphate coated *Includes lower pressure spring to be used if lower pressure is desired, and intermediate shaft *Drive and idler shafts extended into cover to allow for additional support *Screw in plug retains relief valve spring instead of pin *All bolts are self locking socket heads and cover is doweled to pump for proper alignment

This 6.5" Dia. 6 Rib Flat belt power steering pulley is designed to be easily installed on to our steel flange mount (part #73-273F) which is sized for .661" shafts. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

This 6.5" Dia. 6 Rib Flat belt power steering pulley is designed to be easily installed on to our steel flange mount (part #73-273F) which is sized for .661" shafts. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

This 6.5" Dia. 6 Rib Flat belt power steering pulley is designed to be easily installed on to our steel flange mount (part #73-273F) which is sized for .661" shafts. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

This 6.5" Dia. 6 Rib Flat belt power steering pulley is designed to be easily installed on to our steel flange mount (part #73-273F) which is sized for .661" shafts. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

5.5" Dia. Two Groove Crank Pulley for SBC Short Water Pump systems.(for use with drive mandrel)

5.5" Dia. Two Groove V-Belt Crank Pulley for SBC Short Water Pump systems. Pulley interlocks with our #75-320 2.75" Dia. accessory drive pulley to offer an accessory drive option.(Use with #76-545 Balancer bolt)

6" Dia. V-belt Power Steering Pulley, offset for use with our 74-160 SBC long water pump crank pulley with inner groove accessory drive. This power steering pulley is designed to work with our unique flange mount (part #73-273F) which makes pulley installation and removal easy. Note: You must use this pulley with our 77-210 and 77-211 power steering pumps that have the 73-273F preinstalled or purchase the required 73-273F flange mount separately for use on other applications.

LS1 PICKUP FOR 11-281 OPEN CHASSIS CT PAN

LSI PICKUP FOR 13-274A PAN

Remote Oil Cooler Sandwich Adapter goes to cooler before filtration. It provides an in and out port for installing an oil cooler. It mounts between the oil filter and block, replacing the stock bypass and bolting into the mounting holes left after the bypass is removed. The filter is lowered only 1-1/2". Oil ports are 1/2" N.P.T. Comes complete with O-Rings and hardware.

This Chevy SBC Remote Oil Cooler Sandwich Adapter goes to cooler after filtration. It provides an in and out port for installing an oil cooler. It mounts between the oil filter and block, replacing the stock bypass and bolting into the mounting holes left after the bypass is removed. The filter is lowered only 1-1/2". Oil ports are 1/2" N.P.T. Comes complete with O-Rings and hardware.

This 90 deg. rotating remote oil filter adapter spins-on to 13/16"-16 thread with 3-1/4" seal stock filter locations (SBC & Mark5/Gen 6 BBC) and provides 1/2" N.P.T. in and out ports for plumbing a remote filter. It's unique design permits the two 90 degree inlet and outlet ports to be rotated. This simplifies hose and fitting connections for all applications. It is machined from billet aluminum and comes with all necessary hardware and O-Ring seals.

This inline filter is for GM EFI with quick disconnect 3/8" inlet and 16 mm female outlet port, is 4" long and comes with our 2-5/8" long 1 micron fuel element. CM EFI Fuel Filters are a perfect compliment to upgraded fuel pumps and the sensitive components of EFI systems. These filters out flow and have double the filtration of stock fuel filters. 1993-01 Camaro/Firebird

This inline filter is for Ford EFI with factory style quick disconnect inlet and outlet fittings, is 4" long and comes with our 2-5/8" long 1 micron fuel element. CM EFI Fuel Filters are a perfect compliment to upgraded fuel pumps and the sensitive components of EFI systems. These filters out flow and have double the filtration of stock fuel filters. 1984-97 Mustang all 1988-97 All gas Ford cars and trucks

This is a 4" long In-Line Fuel filter with our 2-5/8" long 8 micron fuel element for extra high flow. This filter is designed to be light in weight and simple to install and plumb. This filter is the best available. The housing is 2-3/4" diameter with a red anodized finish and has easily removable clear anodized end caps for element replacement. Features one 1/2" NPT inlet port and two 1/2" npt outlet ports

This lightweight aluminum catch tank has two 1/2" N.P.T. top fittings, one for an inlet and one for a vent. A 3/8" N.P.T. bottom fitting can be used for a drain. The 1 gallon tank has a built in mounting bracket. Dimensions: 9" H x 7" W x 4" D

SBC High Performance (+25% vol.) 3/4" Inlet.

Honda D16A Pickup for Road Race 15-960 Oil Pan

Six pack 4-5/8" tall fine screen elements (140 mesh /180 micron).

Six pack - 4-5/8" tall course screen element (50 mesh/280 micron).