This Alternator Mount is for Ford 302, 351W & 351C Flat & V-Belt applications. It is billet aluminum and can be used with our #77-500 alternator or G.M., Honda, ND, and Mitsubishi alternators. Designed so the alternator is driven off the water pump and positioned to the right of the water pump in either a high or low position. All hardware included.

This Alternator Mount is for Ford 302, 351W & 351C Flat & V-Belt applications. It is billet aluminum and can be used with our #77-500 alternator or G.M., Honda, ND, and Mitsubishi alternators. Designed so the alternator is driven off the water pump and positioned to the right of the water pump in either a high or low position. All hardware included.

This 1" Phenolic adapter that allows the Holley #R4412 2BBL carb to be mounted on 4BBL manifolds that have the standard Holley bolt pattern. These spacers are adjustable front to rear for fine tuning. Comes with all necessary hardware and has threads that are Heli-coiled.

3/8" Thick phenolic spacer mounts between the upper and lower intake of a Ford V-8 4.6L 2 valve engine. Limits heat transfer and improves airflow to increase performance. There is no interference with the stock linkage and hood. Includes a factory gasket.

These cast aluminum polished valve covers have a finned retro look. They would be a great addition to any muscle car or street rod. They feature a 1 1/4" hole on each cover for use as an oil fill or for breathers. They are stock height and will not accommodate roller rockers.

BBC Mounting Kit for Pro Plus Windage Tray #20-909, Kit Includes 4 studs, nuts and washers.

Use this mount to install either our 73-140 or 73-150 pulleys as a crank pulley on a SBC long water pump systems.

Use this mount to install either our 73-140 or 73-150 pulleys as a crank pulley on a SBC long water pump systems.

Pickup for 11-910 Circle Track Left Turn Oil Pan with a M-86C or M-86CHV Oil Pump with 3/4" Inlet

This Electric Pressure Control Valve kit is to convert a standard #24-270 to #24-271 specifications.

This Accusump Electric Pressure Control Valve kit is to convert a standard #24-270 to #24-273 specifications.

This Accusump Electric Control Valve kit is to convert a standard #24-270 to #24-275 spec

This canister oil filter has a 6" tall remote housing, with a 4-5/8" synthetic fiber element. The taller 6" filter can hold more contamination because of it’s size and therefore doesn’t need to be changed as often. The housing is made from a light weight 3-1/4" aluminum square extrusion, 1-1/16" -12 straight o-ring ports, and a removable top cap that allows for easy and mess free element replacement. The filter has a blue anodized body and a clear anodized end cap. A stainless steel mounting clamp is included.

This CM filter is a 6" long In-line filter, with fine screen element and 1/2" NPT ports. The filter comes with a screen element installed and is ideal for use as an inspection filter.

Six pack 4-5/8" tall synthetic oil elements for our 6" oil filters.

Six pack - 2-1/4" tall synthetic 8 micron oil element for our 3.4" oil filters.

Six pack 4-5/8" tall 8 micron fuel elements for our 6" fuel filters.

301-455 Pontiac Race High Volume Oil Pump with 3/4" Inlet.

Pickup for 11-920 Circle Track Left Turn Oil Pan with a M-86C or M-86CHV Oil Pump with 3/4" Inlet

These billet aluminum water necks are designed for 302-351w Ford engines. They feature a 1.5” hose connection, a connection for the stock heater hose line, and have all the necessary clearance for a thermostat. Includes stainless steel hardware.

These billet aluminum water necks are designed for 302-351W Ford engines. They feature a –16 AN fitting, a connection for the stock heater hose line, and have all the necessary clearance for a thermostat. Includes stainless steel hardware.