4" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley. This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

4" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley. This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

1" Thick blended spacer for Holley 4500.

Small Block Mopar Circle Track 11-502/11-512 Oil Pan with a M-72HV High Volume Oil Pump

351W Pickup for Street Strip 15-670S Oil Pan Without Main Support with a M-83 Standard Volume Oil Pump

This 289-302 Ford pro louvered windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation. NOTE: ’94-’95 STOCK MUSTANG STYLE OIL PAN IS A TIGHT FIT.

This 289-302 Ford pro louvered windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 351W Ford pro louvered windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 351W Ford pro louvered windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This Universal Oil Cooler Sandwich Adapter has 3/4"-16 thread and a 2-5/8" O-Ring. It provides an in and out port for installing a oil cooler in almost any application. It mounts between the oil filter and block, lowering your filter only 1-1/4". Oil ports are 1/2" N.P.T.. Comes with hardware.

This Universal Oil Cooler Sandwich Adapter has 13/16"-16 thread and a 2-5/8" O-Ring. It provides an in and out port for installing an oil cooler in almost any application. It mounts between the oil filter and block, lowering your filter only 1-1/4". Oil ports are 1/2" N.P.T.. Comes with hardware.

This Universal Oil Cooler Sandwich Adapter has 18mm -1.5 thread and a 2-5/8" O-Ring. It provides an in and out port for installing an oil cooler in almost any application. It mounts between the oil filter and block, lowering your filter only 1-1/4". Oil ports are 1/2" N.P.T.. Comes with hardware.

This Universal Oil Cooler Sandwich Adapter has 20mm -1.5 thread and a 2-5/8" O-Ring. It provides an in and out port for installing an oil cooler in almost any application. It mounts between the oil filter and block, lowering your filter only 1-1/4". Oil ports are 1/2" N.P.T.. Comes with hardware.

This Universal Oil Cooler Sandwich Adapter has 22mm -1.5 thread and a 2-5/8" O-Ring. It provides an in and out port for installing an oil cooler in almost any application. It mounts between the oil filter and block, lowering your filter only 1-1/4". Oil ports are 1/2" N.P.T.. Comes with hardware.

This universal oil input adapter has 3/4" -16 thread and a 2-5/8" standard O-Ring. This adapter provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter and block, lowering your filter 1-1/4"

This Universal oil input adapters has 13/16" -16 thread and a 2-5/8" standard O-Ring. This adapter provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter and block, lowering your filter 1-1/4".

This Universal oil input adapter has 18mm -1.5 thread and a 2-5/8" standard O-Ring. This adapter provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter and block, lowering your filter 1-1/4".

This Universal oil input adapter has 20mm -1.5 thread and a2-5/8" standard O-Ring. This adapters provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter and block, lowering your filter 1-1/4".

This Universal oil input adapter has 22mm -1.5 thread and a 2-5/8" standard O-Ring. This adapter provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter and block, lowering your filter 1-1/4".

This canister oil filter has a 4" tall remote housing, with a 2-5/8" synthetic fiber element. When room is the limiting factor this shorter filter is ideal and will still deliver absolute protection. The housing is made from a light weight 3-1/4" aluminum square extrusion, 1-1/16" -12 straight o-ring ports, and a removable top cap that allows for easy and mess free element replacement. The filter has a blue anodized body and a clear anodized end cap. A stainless steel mounting clamp is included.

This is a 4" high CM Remote Canister Fuel filter with our 2-5/8" tall 1 micron element. For the extra sensitive fuel system like those who run fuel injection. This filter features housings made from a light weight 3-1/4" aluminum square extrusion, 1-1/16" -12 straight o-ring ports, and a removable top cap that allows for easy and mess free element replacement. The filter has red anodized body and a clear anodized end cap. A stainless steel T-bolt mounting clamp is included.

This 4" high CM Remote Canister Fuel Filter has our 2-5/8" tall 8 micron element for extra high flow. This filter features housings made from a light weight 3-1/4" aluminum square extrusion, 1-1/16" -12 straight o-ring ports, and a removable top cap that allows for easy and mess free element replacement. The filter has a red anodized body and a clear anodized end cap. A stainless steel T-bolt mounting clamp is included.

This alternator mount is for SBC Long Water Pump Flat Belt applications. It is made of billet aluminum and can be used with our #77-500 alternator or G.M., Honda, ND, and Mitsubishi alternators. Designed so the alternator is driven off the water pump and positioned to the right of the water pump in either a high or low position. All hardware included.

These Power Steering Pump Mounts are for SB Ford flat belt applications. They accept our power steering pump, late model GM pumps which use a remote reservoir (Cavalier, Celebrity, etc.) and other aftermarket pumps (Sweet, etc.). Designed to provide an easy way to mount a power steering pump. Ensures correct belt alignment and drive ratios with our pulleys. These mounts are CNC machined from billet aluminum and include all hardware.

This alternator mount is for SBC Short Water Pump Flat & V-belt applications. It is billet aluminum and can be used with our #77-500 alternator or G.M., Honda, ND, and Mitsubishi alternators. Designed so the alternator is driven off the water pump and positioned to the right of the water pump in either a high or low position. All hardware included.