1" Thick open aluminum spacer for Holley 4150/4160.

1" Thick Q-Jet Aluminum spacer. NOTE: Mounting Studs Will Work With Spreadbores But NOT With Q-Jets.

1" Thick Q-Jet Aluminum spacer. NOTE: Mounting Studs Will Work With Spreadbores But NOT With Q-

SBF 289-302 One Piece Oil Pan Gasket For use with these 302 pans: 11-644, 15-620, 15-620S, 15-640, 15-644, 15-644S. NOTE: Our Ford One Piece & Four Piece Oil Pan Gaskets are NOT Interchangeable. The Ford Oil Pan Stamping That Is Used With A Four Piece Oil Pan Gasket Is Different Than The Stamping That Is Used With The One Piece Oil Pan Gasket. The Four Corners Where The Oil Pan Turns Down To Go Around The Timing Cover Or The Rear Main Cap Are Sharper On The Four Piece Gasket Oil Pan Than The One Piece Style Oil Pan. For A proper Seal You MUST Use The Gasket Style That Is Appropriate For The Oil Pan You Are Using.

351W Pickup for Road Race 15-694/15-694S Oil Pan with a M-83HV High Volume Oil Pump with 3/4" Inlet

289,302,351C/M,351W AND 429/460 These trays are designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation. Note: 94-95 stock Mustang style oil pan is a tight fit.

This 289-302 Ford screen windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary

This 351W Ford screen windage tray for rear sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 351W Ford screen windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation.

This 1" aluminum adapter allows the #R4412 2BBL carb to be mounted on 4bbl manifolds having the standard Holley bolt pattern. This can also be used with the Edelbrock 4BBL Performer intake. This adapter is designed to position the carb to deliver the best performance and is non-adjustable. This is the same as our #85-065 but machined from aluminum.

332-428 Ford High Volume Oil Pump +25% volume.

289,302,351C/M,351W AND 429/460 Mounting Kits include four main cap studs, nuts, washers and tray mounting hardware. Full main cap mounting kits include ten main cap studs, nuts, washers and accessory mounting hardware. *PLEASE NOTE: (1) For R302 Engine Blocks use #20-942 or #20-943 & (2) The 429-460 mounting kit includes bolts, not studs.

BBF Pickup for 13-766 Drag Race Oil Pan with a M-84DHV High Volume Oil Pump

302 Pickup for 15-620 Street Strip Oil Pan Without Main Support with a M-68 Standard Oil Pump

Mopar 5.7L/6.1L Drag Race 13-980A Mid-Sump Oil Pan

SBC Short Water pump Crank Pulley Mount. Use this mount to install either our 73-140 or 73-150 pulleys as a crank pulley on a SBC short water pump systems.

SBC Short Water pump Crank Pulley Mount. Use this mount to install either our 73-140 or 73-150 pulleys as a crank pulley on a SBC short water pump systems.

Mopar pickup for 15-900/15-910 Oil Pans with a M-72HV High Volume Oil Pump

3/8 NPT Pick up for Big Block Mopar Wedge engines with 15-950 oil pans

Pick-up.

Pick-up.

BBC Mounting kit for Screen Windage Trays (4 studs, nuts and washers).