351W Pickup for 11-694 Circle Track Oil Pan with a M-83HV High Volume Oil Pump with 3/4" Inlet

351W Pickup for 11-660 Circle Track Oil Pan with a M-83HV High Volume Oil Pump with 3/4" Inlet

BBF Pickup for 15-770 Fox Body Conversion Oil Pan Used with Canton Racing Steel Main Support with a M-84DHV High Volume Oil Pump

302 Pickup For 11-600 Circle Track Stock Appearing Oil Pan with a M-68 Standard Volume Oil Pump

302 Pickup for Circle Track 11-644 Oil Pan with a M-68HV High Volume Oil Pump

BBF Pickup for Fox Body Conversion 15-770 Oil Pan with a M-84DHV High Volume Oil Pump

BBF Pickup for Road Race 15-774 Oil Pan with M-84DHV High Volume Oil Pump

15-875 - PICKUP FOR FE 15-874 OIL PAN

BBF Pickup Ford 4WD Truck 16-774 Oil Pan with a M-84D Standard Volume or M-84DHV High Volume Flange Style Pickup Oil Pumps.

Pickup for 16-870 Oil Pan

302 Pickup for 15-620 Street Strip Oil Pan Without Main Support with a M-68 Standard Oil Pump

302 Pickup for Street Strip 15-620S Oil Pan with Canton Racing Steel Main Support with a M-68HV High Volume Oil Pump or M-10688 High Performance High Volume Oil Pump with 3/4" Inlet

Flange Mount for Power Steering Pulleys. The Flange mount is sized for .661" shafts used on most pumps.

Flange Mount for Power Steering Pulleys. The Flange mount is sized for .661" shafts used on most pumps.

This 1" Phenolic adapter allows the #R4412 2BBL carb to be mounted on 4BBL manifolds having the standard Holley bolt pattern. This can also be used with the Edelbrock 4BBL Performer intake. This adapter is designed to position the carb to deliver the best performance and is non-adjustable. DEVELOPED BY CARL McQUILLEN

Pickup for Ford 4WD Truck 16-674 Oil Pan with a M-83 Standard Volume or M-83HV High Volume Oil Pump

SBF Pickup for Ford 16-724 Oil Pan

This lightweight riser plate is machined from billet aluminum. Features top and bottom o-ring seals, 1/2" N.P.T. front port for temperature sender, and two 3/8" N.P.T. ports for cooling lines. The riser plate has a clear anodized finish.

This 351C Ford Screen Windage tray for front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware necessary for installation

This 429-460 Ford Screen Windage tray for front and rear sump. This tray is designed to fit into stock and aftermarket oil pans.

Drive Mandrel Kit comes with all the necessary hardware and our 1" dia. drive mandrel, which is designed to bolt to our flat belt crank pulleys and mount.

BBF Pickup for Marine 18-760 Oil Pan with a M-84D Standard Volume Truck Flange Style Pickup Oil Pump or M-84DHV High Volume Truck Flange Style Piclup Oil Pump

SBC Mounting Kit for Pro Power Plus Windage Tray #20-908 & 20-908S Kit Includes 4 studs, nuts & washers.

This SBC standard volume pressure balanced oil pump has been modified to provide a smooth continuous flow of oil through the full RPM range. By reworking the pump housing and providing feeder grooves, we bleed some of the high pressure back into the gears providing smoother operation and more constant pressure. This allows for the high RPM operation on a race engine and limits oil pump cavitation. Since it is designed for smooth operation at high RPM’s, the idling oil pressure can be up to 10 lbs lower than that of a standard oil pump.

1" Thick 4-hole aluminum spacer for Holley 4150/4160 600+ CFM carbs.