SBC PICKUP 8” DRAG 3/4” TUBE M155 PUMP

SBC Pickup for 8" Deep Drag Race/Street Strip Oil Pan with a M-10555 Select High Performance Oil Pump with 3/4" Inlet

SBC PICKUP 8” DP 3/4” W/M155HV

SBC PICKUP 8.5” DP PAN 3/4” TUBE W/M155HV

This Oil Input Adapter with 1/2" N.P.T. port is for use with a dry sump or an external pump wet sump system. The adapter bolts into the stock bypass mounting holes. Fits both Small and Big Block Chevy, comes with all hardware & O-Rings.

3.75" Dia. Flat Belt 3 Rib add on pulley This pulley mounts in front of the water pump pulley to drive accessories. Can be used as shown, as a power steering drive with our # 73-373 P/S pulley or as a alternator drive with our #73-304 or #73-309 alternator pulleys.

This 2.75” accessory drive pulley with built in alignment bushing interlocks with our #75-120 crank pulley. (Use with #76-545 balancer Bolt)

Billet coolant cap cover designed to fit OEM coolant caps in many late model Ford applications. A simple push-on installation, this cover compliments our aluminum stock replacement coolant tanks that utilize OEM cap. (tank part numbers that end with an "S") Fits: Ford coolant cap #'s: 1W138101AA, F6DZ8100A, (Motorcraft # RS103) Intercooler cap #'s: XL3V8101AA, XL3Z8100AA, (Motorcraft # RS517)

This is a 1" thick spacer for Holley 2BBL carbs with matching intakes.

BBF Bolt-on Pickup for Street Strip 15-750 Oil Pan with a M-84BHV High Volume Cobra Jet Oil Pump

BBF Pickup for Road Race 15-764 Oil Pan with a M-84DHV High Volume Oil Pump

This billet aluminum mount is designed to be used with our remote inline style CM filters. They provide an easy to install mounting option while offering an attractive presentation.

SBC PICKUP CT HIGH VOLUME 7”

These Main Support Windage Trays bolt to the pre-drilled and tapped holes on our main cap stud supports. These trays keep the windage around the rotating assembly away from the oil in the sump and the oil in the sump away from the rotating assembly. Come with mounting bolts.

1/2" Thick 4-hole aluminum spacer for Holley 4150/4160 600+ CFM carbs.

These Main Support Windage Trays bolt to the pre-drilled and tapped holes on our main cap stud supports. These trays keep the windage around the rotating assembly away from the oil in the sump and the oil in the sump away from the rotating assembly. Come with mounting bolts.

These Main Support Windage Trays bolt to the pre-drilled and tapped holes on our main cap stud supports. These trays keep the windage around the rotating assembly away from the oil in the sump and the oil in the sump away from the rotating assembly. Come with mounting bolts.

SBC Pickup for 7.5" Deep Drag Race/Road Race Oil Pans with M10552 or M10555 select series oil pumps

SBC Pickup for 8" Deep Drag Race/Road Race Oil Pans with M10552 or M10555 select series oil pumps

1/2" Thick open aluminum spacer for Holley 4150/4160.

1/2" Thick Q-Jet Aluminum spacer. Features: * Precision Machined From Aluminum * 4-hole design designed for increased carburetor barrel length to improve low-end response NOTE: Mounting Studs Will Work With Spreadbores But NOT With Q-Jets.