include "vsadmin/db_conn_open.php"; include "vsadmin/inc/metainfo.php";?> Blue Oval Performance store: , ,
             home | products | search | checkout | contact | map    ||  UPS Tracking  

Search for a Part here:

Shopping cart  Shopping cart
0 Product(s) in cart
Total 0.00
» Checkout



2917 NE 65th Street
Suite D
Vancouver WA 98663

[map]

(360) 993-1745

Top Section Deleted » MM Bumpsteer Kits

 Checkout
Product ID: MMTR-7
Bumpsteer kit, 1979-93 Mustang, tapered-stud style
Bumpsteer kit, 1979-93 Mustang, tapered-stud style
5.0 Mustang and Super Fords magazine used MM k-member spacers on their Fox 500 project car. With the MM spacers, the Shelby GT 500 supercharged 5.4L engine was lowered enough in their Fox Mustang that the hood modifications needed to clear the intake were much less radical than would otherwise have been required.
This 1/4" spacer kit includes four aluminum spacer plates to fit between the k-member and the chassis. Longer bolts are included as appropriate. Reuses OEM nuts and nut-plates, and some of the OEM attachment bolts. Spacers are also available in 1/2" thickness.
Fits 1979-2004 Mustangs with any k-member, stock or aftermarket.
Some considerations when installing spacers between the k-member and the chassis:
•Ground clearance may be reduced.
•The position of caster/camber plate strut shaft spacers may need changing to maintain the strut's proper compression travel and droop travel.
•Transmission mount may need modification to maintain proper driveline angles.
•Pinion angle may need to be adjusted to maintain proper driveline angles.
•Steering shaft will need to be extended slightly (easily accommodated by an MM telescoping steering shaft).
•Front suspension geometry may be altered, with possible consequences to the car's handling.
•A front-end alignment will be necessary.
 

Email Friend

Price: 154.89
Out of Stock

 
« Previous | Next »