Blue Oval Performance store: , ,

Steeda's SN95 K-Member was designed to shed some weight from the front end without requring a full suspension replacement or requireing modified geometry. Made from a mix of 4130 chrome moly and low alloy steel, our K-member is approximately 19 lbs lighter than the OE K-member. The control arm cups were designed to accept unmodified stock control arms so tubular control arms are not required. Our k-member features 2 lower control arm mounting positions for fine tuning of roll center geometry. One position if for cars at stock ride height or less than 1 inch lower than stock. The second position is recommended for cars 1 to 1 1/2 inches lower than stock. For further roll center correction if you are lowered more than 1 1/2 inches check out our X2 Ball Joints.




home \| products \| search \| checkout \| contact \| map \|\| UPS Tracking