AFR 215cc SBC Eliminator Raised Runner Head

The Best 23° Cylinder Head You Can Buy

AFR 215 SBC Cylinder Head If you must run 23º heads, you just can’t find a better one anywhere! The unique AFR 215cc Raised Runner small block Chevy cylinder heads feature a raised intake port to straighten the runner for superior high flow. These angle plug heads are available in two stages of performance. With 100% CNC ported intake runners, 76cc combustion chambers and 80cc exhaust ports with a 3/4” thick head deck (ideal for nitrous or blower applications). We also offer the “as cast” Stage 1 heads for Raised Runner performance on a budget. Standard valves are 2.100 intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The incredible flow characteristics, 23º valve angle, and raised runners make this the perfect head for 350 to 434 cid engines in drag cars, sprint cars, and late model oval trackers operating from 4500 rpm on up. Raised Runner heads are available in either standard or spread port exhaust. Shaft mount rockers with a 0.450” offset on the intake are required with a .150” to .180” offset lifter. The distance from floor to the head deck at the gasket is 0.700”.

215cc SBC Raised Runner Head Part Numbers

CNC Ported Pairs of Cylinder Heads Complete With Parts and Ready to Install

Competition Package CNC Ported Heads - No Parts
Description	Part Number
215cc Raised Runner, Angle Plug, Standard Exhaust - No Parts	1206
215cc Raised Runner, Angle Plug, Spread Port Exhaust - No Parts	1207
Competition Package CNC Ported Heads - With Parts
Description	Part Number
215cc Raised Runner, Angle Plug, Standard Exhaust - w/ parts	1208
215cc Raised Runner, Angle Plug, Spread Port Exhaust - w/ parts	1209
Stage 1 Bare Heads (no parts or porting)
Description	Part Number
215cc Raised Runner, Angle Plug, Standard Exhaust - no porting or parts	1204
215cc Raised Runner, Angle Plug, Spread Port Exhaust - no porting or parts	1205

Not legal for sale or use on pollution controlled motor vehicles in the United States.

Basic Package Components	Part #
100% CNC Ported Combustion Chambers 100% CNC Ported Exhaust Ports 100% CNC Ported Intake Ports 3-angle Valve Job
Intake Valve, 2.100" x .200" long	AFR #7038
Exhaust Valve, 1.600" x .200" long	AFR #7058
1.550" OD Roller dual valve spring w/ dampener, 210lbs on seat, .720" maximum lift	AFR #8001
10° Titanium Retainers	AFR #8505
10° Valve Locks	AFR #9005
Valve Seals	AFR #6611
Hardened Shims	AFR #8045
Intake Valve Seats	AFR #9060
Exhaust Valve Seats	AFR #9070
Bronze Valve Guides	AFR #9050

Special orders available on request.

All Accessory Holes are Predrilled & Tapped!

Specifications, Features, and Supporting Components

Head Torque	65-70 ft. lbs
Rocker Shaft Torque	55-60 ft. lbs
Intake Port Gasket, 1.310" X 2.180"	Fel-Pro #1263, AFR #6826
Exhaust Port Gasket	Fel-Pro #1406, AFR #6835
Head Gasket	350cid Fel-Pro #1003, AFR #6800
	400cid Fel-Pro #1014, AFR #6802
Head Bolts & Studs	Standard ARP, AFR #6310 & #6305
Head Bolt Washers	Manley, AFR #6320
Stud Girdle	Shaft Mount Rockers Required
Suggested Manifold	Edelbrock #2926, GM #10051103
	Brodix HV1007, AFR #55004, #5035, or #5064
	For Dominator Carb: Edelbrock #2971
Spark Plug Starting Range	Autolite 3910
Combustion Chambers	76cc
Spring Pocket can be cut to 1.750, no deeper
Valve Spacing	Standard
Rocker Arms	T & D Shaft with .450" offset
Valve Angle	22.5°
Angle Mill (milling available)	.008" per cc
Flat Mill (milling available)	.006" per cc
Pushrods	5/16" Hardened AFR #6601 - #6604
Roller Lifters	.150-.180" offset w/ T & D .450" Intake Rocker

Important: Do not port match your intake manifold to this Fel-Pro gasket, as they do not exactly fit AFR heads.

Note: Milling head deck will affect flow numbers

Email Friend

List Price: ~~3406.00~~

Price: 3469.01

Out of Stock

« Previous | Next »




home \| products \| search \| checkout \| contact \| map \|\| UPS Tracking

AFR 215cc SBC Eliminator Raised Runner Head

The Best 23° Cylinder Head You Can Buy

215cc SBC Raised Runner Head Part Numbers

CNC Ported Pairs of Cylinder Heads Complete With Parts and Ready to Install

Competition Package CNC Ported Heads - No Parts

Description

Part Number

Competition Package CNC Ported Heads - With Parts

Description

Part Number

Stage 1 Bare Heads (no parts or porting)

Description

Part Number