AFR 195cc SBC LT4 Eliminator Street Cylinder Head

The Ultimate Bolt-on Emissions Legal Street Weapon

AFR 195 SBC LT4 Cylinder Heads The AFR Emissions Legal (CARB EO #D-250-2 for engines up to 1994), 195cc intake port LT4 small block Chevy cylinder heads are available in an LT4 angle plug version. These heads feature a 56cc to 74cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are 2.020 intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2500 rpm to 6500 rpm (higher rpm ranges possible depending on combination of parts), 23º valve angle, and standard valve spacing make this the perfect street head for 350 cid to 383 cid engines. Designed specifically for 1996 Corvettes or LT4 manifold users. No special parts are required. Dual valve cover bolt pattern is standard.

Note:

Hydraulic roller cams typically experience valve float at 5800-6000 rpm because of their fast ramp rates. AFR suggest you upgrade your springs to AFR part #8032, 1.530 O.D. with higher spring pressures and use our Patented “Hydra Rev Kit” to reduce chances of valve float associated with rpm 6000 or higher.

195cc SBC LT4 Street Head Part Numbers

CNC Ported Pairs of Cylinder Heads Complete With Parts and Ready to Install

CNC Street Ported Heads
Description	Part Number
195cc LT4 Street Heads, Angle Plug, 56cc-74cc	1031*
Competition Package CNC Ported Heads
Description	Part Number
195cc LT4 Street Heads, Angle Plug, 56cc-74cc	1039*

Stage 1 Bare Heads (no parts or porting) are available.

*Only models with heat riser (marked by an asterisk)
are emissions legal, all others are not legal for sale or use on
pollution controlled motor vehicles in the United States.

Basic Package Components	Part #
100% CNC Ported Combustion Chambers 100% CNC Ported Exhaust Ports 100% CNC Ported Intake Ports 3-angle Valve Job
Intake Valve, 2.020" standard length	AFR #7204
	Comp Pkg #7016
Exhaust Valve, 1.600" standard length	AFR #7219
	Comp Pkg #7056
1.450" OD Hydraulic dual valve spring w/ dampener, 120lbs on seat, .550" maximum lift	AFR #8020
(upgrades available)	Comp Pkg #8015
10° Titanium	AFR #8506
	Comp Pkg #8505
10° Valve Locks	AFR#9005
3/8" Rocker Studs	AFR #6410
Guide Plates (if using non-self aligning rockers)	AFR#6105
Valve Seals	AFR #6611
Hardened Shims	AFR #8043
Intake Valve Seats	AFR #9060
Exhaust Valve Seats	AFR#9070
Bronze Valve Guides	AFR#9050

All Accessory Holes are Predrilled & Tapped!

Specifications, Features, and Supporting Components

Head Torque	65-70 ft. lbs
Rocker Stud Torque	55-60 ft. lbs
Intake Port Gasket	GM LT4
Exhaust Port Gasket	Fel-Pro #1404, AFR #6834
Head Gasket	350cid Fel-Pro #1074, AFR #6803
Head Bolts & Studs	Standard ARP, AFR #6310 & #6305
Head Bolt Washers	Manley, AFR #6320
Stud Girdle	AFR #6201
Suggested Manifold	GM LT4
Spark Plug Starting Range	AC FR3LS
Combustion Chambers	56cc to 74cc
Spring Pocket can be cut to 1.625, no deeper
Valve Spacing	Standard
Rocker Arms	Standard
Valve Angle	23°
Angle Mill (milling available)	.008" per cc
Flat Mill (milling available)	.006" per cc
Pushrods	5/16" Hardened AFR #6606

Important: Do not port match your intake manifold to this Fel-Pro gasket, as they do not exactly fit AFR heads.

Note: Milling head deck will affect flow numbers




home \| products \| search \| checkout \| contact \| map \|\| UPS Tracking

AFR 195cc SBC LT4 Eliminator Street Cylinder Head

The Ultimate Bolt-on Emissions Legal Street Weapon

Note:

195cc SBC LT4 Street Head Part Numbers

CNC Ported Pairs of Cylinder Heads Complete With Parts and Ready to Install

CNC Street Ported Heads

Description

Part Number

Competition Package CNC Ported Heads

Description

Part Number

Stage 1 Bare Heads (no parts or porting) are available.